11-Nov-2014, all paid off !

The car was incredible with the 7 degree caster blocks. I was finally able to drive it really well and keep with modern cars. The tail wasn't swinging anymore.

 

Adding caster to front

I have changed back to ball diffs, because the geardiffs don't seem so smooth. Since I did not have enough parts to rebuild a rear ball diff, I made some improvements to the standard kyosho rear ball diff.

I got a 8x16x5 bearing, and got my machine shop to make a 16mm sleeve with 19.8mm outer diameter.


 

The bearing slides into the geardiff casing

 

This ball diff is now very smooth.

I also used Lazer ZX-5 7 degree c hubs with 3racing ver2 ZX-5 alloy knuckles. I had to grind the c hubs in the fronts to make sure it will fit into the arms without binding. I am in the process of making a ZX arm that will be a direct fit with ZX-5 c hubs.

7 degree caster blocks with 3 degrees in the arm mounts equal 10 degrees total. this should improve handling. However I find that steering throw is also reduced.

Assembled parts. The front CVD is 3racings 65.5mm and upper turnbuckle is now 50mm.

                                   

Grind the c hub below the angle mark. With my new arms which will be ready next week, no modifications will be needed.

 

Turbo Optima Mid SE SWB test run for racing

Bashing on the Beach

 

 

 

Ready for racing - 2014

After cleaning up. Some sand went in the front gearbox and made its way to the back. I changed new gearbox so that it will hold better on the chassis.

Serviced LWB next to my SWB

Built a SWB Optima Mid - finally !

This was my brother's old Turbo Optima Mid, that was in pieces.
I have a LWB ,but I missed driving a SWB, so I decided to rebuild one with some upgrades.

My Own Made associated B4 slipper compatible layshaft. More is available for sale.

The loose parts layed out

 

The front & rear ball diffs and rear gearbox innards. Notice my own made hard PEEK gear. I have more for sale.

Semi completed

Assembled gearbox and slipper.

With 2.2" wheels

Kyosho GP10 strong steering parts.

Incomplete rear end

Grinded arms, flipped, to make sure CVDs exit straight

semi complete

Recently completed with Mid SE decals

http://www.youtube.com/watch?v=QrZf_AYY0og

 

This is a video of this car running, hadn't had a chance to test it offroad yet.
After the ball diffs get gritty I will install gear diffs to cut down maintenance.
next build, my Old Lazer ZX !

Raced my mid today

So finally there is a EP offroad race in MYMTRG track. Unfortunately there wasn't enough entrants so all the EP 1/10 rc vehicles had to be raced together. In the field were 2 Durango DEX 410s, 2 Losi 22s, and one 2WD SCT. On Saturday, the track was mildly muddy, so I decided to use OT-66 tyres. It wasn't a really good race as I did not have any practice these last two weeks. The car kept overturning easily in the ruts as it seemed like the spikes were digging in too much in the bumps. However I finished the race without damage to the car, except the gear cover. I managed 5 laps in 5.08 which netted me in 3rd place for the first heat. Suddenly my boss called me and ask me to haul my butt to work. So I had no choice but to leave the 2nd and 3rd heat. Sure enough some one else beat my time and I slid down to 5th.

On Sunday, I used Lazer ZX-R tyres, figuring that the track was still damp and the hard spikes will dig in well. In the first final I did not do so well, but better than Saturday. I still made 5 laps , and cut down my time to 5.02 which netted me a 3rd place behind a TLR22. Still not happy with the car overturning, I increased negative camber on all 4 wheels, I surmise this would help prevent the car from overturning in the ruts. I also tightened up the slipper clutch to gain more speed and changed my driving style to go easy on throttle coming out of the corners, then gradually increasing speed. It paid off in spades and I cut down my best lap time down by 6s. I also finished 6 laps this time. In the 3rd heat I manage to repeat my performance. 2 finals were tallied and I won 2nd place behind a DEX410 driven by a young guy name dragon. I was really happy with my Optima Mids performance , and the new arms and PEEK c hubs I made were really strong and did not fail even though I took some pretty nasty hits. The Optima Mid has gained the respect from the newer generation after this race. The young guys were surprised with its performance and silence.